|
| PRAMAC W 210 - HUK |
 |
Item code: LA200MHI001
(purely indicative picture) |
Main features
| Rated maximum power (LTP) | : | kW | | Rated prime power (PRP) | : | kW | | Voltage | : | 115, 230 V | | Frequency | : | 50 Hz | | Minimum welding current | : | 30 A | | Maximum welding current (35%) | : | 200 A | | Max. diameter of rutilic electrodes | : | 5,00 mm | | Max. diameter of basic electrodes | : | 4,00 mm | | Max. diameter of cellulosic electrodes | : | 5,00 mm | | Engine manufacturer | : | Honda | | Starting system | : | Recoil | | Speed governor | : | Mechanical |
W Series
Welders from 170 to 220A with mechanic regulation of the welding current. Reliability, sturdiness.
|
| Three-phase power factor | n.a. | | Single-phase maximum power (LTP) | 4,44 kVA | | Single-phase maximum power (LTP). | 4 kW | | Single-phase prime power (PRP) | 4,22 kVA | | Single-phase prime power (PRP). | 3,8 kW | | Single-phase continuous power (COP) | 4 kVA | | Single-phase continuous power (COP) | 3,6 kW | | Single-phase power factor | 0,9 cosPhi | | Rated maximum power (LTP) | n.a. | | Rated maximum power (LTP) | n.a. | | Rated prime power (PRP) | n.a. | | Rated prime power (PRP) | n.a. | | Rated continuous power (COP) | n.a. | | Rated continuous power (COP) | n.a. | | Three-phase rated current at COP | n.a. | | Rated current at COP | 17,4 A | | Phases | 1 | | Voltage | 115, 230 V | | Frequency | 50 Hz | | Battery charger voltage | No | | Battery charger current | No | | Panel location | On alternator | | Frame type | Tubular | | Compliancy certification | CE |
|
| Welding current (60% duty) | 170 A | | Open circuit voltage | 95 V | | Welding regulation type | Manual | | Minimum welding current | 30 A | | Maximum welding current (35%) | 200 A | | Minimum welding voltage | 21,2 V | | Maximum welding voltage | 28 V | | Max. diameter of rutilic electrodes | 5,00 mm | | Max. diameter of basic electrodes | 4,00 mm | | Max. diameter of cellulosic electrodes | 5,00 mm |
|
| Engine manufacturer | Honda | | Model | GX390 | | Stroke | 4 | | Fuel | Gasoline | | Number of cylinders and disposition | 1, inclination angle | | Displacement | 389 cm³ | | Air intake | Natural | | Starting system | Recoil | | Nominal operating speed | 3180 rpm | | Speed governor | Mechanical | | Continuous power COP | 6,3 kW | | Prime power PRP | 7 kW | | Standby power LTP | 7,9 kW | | Lube oil capacity | 1,1 l | | Fuel consumption at 75% load | 1,93 l/h | | Electric circuit voltage | No | | Cooling system | Air-cooled |
|
| Alternator specifications |
| Alternator manufacturer | PRAMAC SpA | | Model | Asynchronous | | Poles | 2 | | Voltage regulation system | Capacitor | | Protection grade | IP 23 |
|
| Fuel tank location | On engine | | Fuel tank capacity | 6,5 l | | Running time at 75% COP | 3,37 h | | Measured acoustic power (LWA) at 4 mt | 97 dBA | | Noise level at 7 m | 72 dBA | | Guaranteed noise level (LWA) | 97 dBA | | Operating conditions | No |
|
| Length | 810 mm | | Width | 610 mm | | Height | 600 mm | | Dry weight | 114 Kg |
|
| Wheels and handles | Optional | | Job site trailer | No | | Road trailer | No |
|
| Hourmeter | No | | Voltmeter | No | | Isometer | No | | Water thermometer | No | | Voltage presence indicator | No | | Engine oil / water high temperature indicator | No | | Alternator high temperature indicator | No | | Low fuel level indicator | No | | Low oil pressure Indicator | No | | Low battery charger indicator | No | | High temperature generator shut-down system | No | | High temperature engine shut down | No | | Low fuel level shut-down system | No | | Low engine oil pressure shut-down system | No | | Low battery charger shut-down system | No | | ELCB (Earth Leakage Circuit Breaker) | No | | Magnetothermic protection | Yes | | Thermal protection only | No | | Hot start device | No | | Auto-idle | No | | Emergency stop | No | | Lube oil guard | Yes | | Welding current selection (50 ~ 100%) | No | | Polarity switch predisposition | No | | Arc control device | No | | Remote control socket | No | | Double-positive welding socket (with additional resistance) | Yes |
|
| CEE 2P+T 115V 16A | 2 | | CEE 2P+T 230V 16A | 2 |
|
Technical specifications are subject to change without notice. Consult your local PRAMAC representative for more information.
|
|
